Item No: F100CR
In Stock - Same Day Shipping
Chemyx Certified Refurbished
We clean, test, and certify all Chemyx refurbished products and include a 90-day warranty. All refurbished Chemyx Pumps include a power cord. Supply is limited and availability is guaranteed once we receive your full payment. Some of these used infusion pumps are just like new, while others might have slight wear or cosmetic damage and are discounted accordingly.
15-Day Return Policy
The Fusion 100C is a high-performance, low-cost syringe pump designed for use in synthetic chemistry, electrospinning, drug infusion and ESI microliter injections.
- Graphic LCD interface
- RS232 port for computer control
- Integrated syringe dimensions library
- Selectable rate units: μl/hr, μl/min, ml/hr, ml/min
- Stall detection with audible alarm
- Silent operation
- Accommodates any syringe: glass, plastic, and microsyringes
Chemyx Fusion 100C is an infusion-only syringe pump that performs most precision dispensing activities. This syringe pump comes equipped with a D9 RS232 port that directly accepts ASCII commands from Labview/Labwindows, HyperTerminal and Visual Studio without the need for drivers.
Bright LCD and Easy-To-Use Menu Interface
A monochrome graphic LCD display and directional keys makes the Fusion 100C a very easy-to-use syringe pump. Users of this used infusion pump can set any parameter through a familiar “windows” like environment and change settings from Syringe ID, flow rate, volume and delay time. We also included an internal syringe library that stores syringe dimensions from major manufacturers. The flow rate can be changed while the pump is running.
A miniature computer continually monitors the system while in operation and provides constant status updates via the LCD display. In the event of a power failure the pump will remember the last settings and can resume operation when power is returned. The Fusion 100 will also detect overloads, shut off the motor and warn the user with an audible alarm. An adjustable safety nut on the guide rod can be used to protect glass and microsyringes.
|Accuracy||± < 0.35%|
|Reproducibility||± < 0.05%|
|Syringe Size (Min/Max)||0.5µL to 60mL|
|Syringe Flow Rates||See Syringe Library for Min & Max Flow Rates|
|Minimum Flow Rate||0.0001 µL/min (with 0.5µL syringe)|
|Maximum Flow Rate||90 mL/min (with 60mL syringe)|
|Linear Force||29lb (13.1kg)|
|Display||4.3 inch LCD Screen|
|Connectivity||RS232 and TTL Ports|
|System Dimensions||9.5 x 6.8 x 4.4 inches (24 x 17 x 11 cm)|
|Motor Drive||0.9˚ Stepper Motor with Micro-stepping|
|Step Resolution||0.198 µm/step|
|Operating Temperature||4°C to 40°C (40°F to 104°F)|
|Storage Temperature||-10°C to 70°C (14°F to 158°F)|
|Humidity||20% to 80% RH, non-condensing|
|Regulatory Compliance||CE, RoHS, REACH, FCC, IC|