Getting Started

Chemyx produces some of the industry’s finest syringe pumps. To hasten the product’s use, we provide LabVIEW™ and MATLAB™ APIs to the customer. This software guide will walk you through communicating with the syringe pump from installing the hardware and software to sending commands and running the pump.

Requirements

  • Chemyx Syringe Pump
  • RS232 DB9 straight through cable or RS232 DB9 to USB cable
  • Power Cord
  • Power adapter is needed for OEM module.

Connectivity Options

Computer RequirementsChemyx pumps can be controlled programmatically through custom software or any RS232 communication software. Chemyx provides a LabVIEW driver and Matlab example code.The driver works with mac or windows computer.LabVIEWA computer running LabVIEW 2015 or later along with National Instruments VISA. The computer must be equipped with a serial port or a USB port.MatlabA computer running Matlab and Microsoft Windows. The computer must be equipped with a serial port or a USB port.

Model USB-B RS232 TTL
Fusion 100
Fusion 200
Nanojet
Fusion 4000
Fusion 6000
OEM Module

    Have any questions or comments about this article? Fill out the form below and we'll get back to you as soon as possible!

    Privacy & Terms

    By choosing "I agree" below you agree to Chemyx Inc Terms of Service. You Also agree to our Privacy Policy, which describes how we process your information.