Downloads Fusion 4000 Fusion 6000 Fusion 6000-X
Download the Python program to control your Chemyx pump.
Using incompatible solvents may contaminate your solvent, introduce error into your experimental results, and reduce the lifetime of the syringe.
Catalytic testing. CO2 hydrogenation to methanol was conducted in a high-pressure continuous-flow fixed-bed reactor setup comprising mass flow controllers to feed gases (Bronkhorst, El-Flow ...
Bonding quality test. Inertial devices are operated at high flow rates; hence, the bonding technique must provide enough strength to prevent leakage from the ...
EXPERIMENT: Millipore water (18.1 Ω) was used for all experiments. NaCl(s) (Sigma-Aldrich; 99.9% purity) and CO2(g) (Praxair; 99.999% purity) were used as received. Fluidic System. Figure 1...
Study methods For the purpose of our research, we modified and upgraded the system for CCBD [11]. In the upgraded CCBD system, controllability over the ...
Adsorption kinetics experiments The adsorption kinetics experiment was carried out at initial arsenate concentration of 20 mg/L with adsorbent dosage of 0.1 g/L, and ...
1 Continuous-flow setups 1.1 Generalities 1.1.1 Pumps Chemyx Nexus 3000 and Chemyx Nexus 6000 syringe pumps were used to handle the feed solutions of tetrabutylammonium azide (nBu4NN3), tosyl ...
Test injection rates were determined for each needle based on ISO 7864:2016 Section C3.2.4 Briefly, the standard indicates that when possible, needles should be tested ...
By choosing "I agree" below you agree to Chemyx Inc Terms of Service. You Also agree to our Privacy Policy, which describes how we process your information.