How To Lubricate A Chemyx Stainless Steel Syringe

Whenever new O-rings installed, or after frequent usage; the plunger on the stainless steel syringe may feel tight and cannot push/pull by hand. In this case, the syringe will need to be lubricated by following these steps:

  1. Pull the plunger out of the syringe
  2. Using an electrical grade Silicone lubricant spray sparsely within the syringe’s inner surface wall; rotate the syringe as necessary for even spraying. If overspray occurs, use lint-free paper to wipe down the excess lubricant.
  3. Insert the plunger, move the plunger back and forth with slight rotation for even distribution.

Watch this video for a demonstration

 

Chemyx Stainless Steel Syringe & Electrical Silicone Lubricant

 

Have any questions or comments about this article? Fill out the form below and we'll get back to you as soon as possible!

Privacy & Terms

By choosing "I agree" below you agree to Chemyx Inc Terms of Service. You Also agree to our Privacy Policy, which describes how we process your information.