How To Set Up The Pressure Sensor For The Fusion 6000

Follow these steps to set up the pressure sensor for the Fusion 6000 Chemyx Syringe Pump

  1. Attach the pressure sensor to your syringe:

  1. Place your syringe in the syringe pump:

 

  1. Plug the pressure sensor cable into the syringe, it should snap in place:

 

  1. Select the Pressure icon on the Fusion 6000 Syringe Pumps touch screen:

 

  1. In the “Pressure Settings” Select your “Target Pressure” by selecting the pressure number using the touch screen. Use the keypad to the right to set your pressure from 0 to 2,000 (max) PSI

Note that there are three functions in the “Pressure Settings” including: Stop flow at target pressure, Hold target pressure and modulate flow, with the flow rate adjustment.

 

If you need additional help you can call email us at info@chemyx.com

Have any questions or comments about this article? Fill out the form below and we'll get back to you as soon as possible!

Privacy & Terms

By choosing "I agree" below you agree to Chemyx Inc Terms of Service. You Also agree to our Privacy Policy, which describes how we process your information.